Case Study: My Experience With Rivets

The Wonderful Things Rivet Fasteners Can Offer to Industries

Rivet is an old form of fastener which is still used today. In the world wars, airplanes and boats make use of rivet in the construction. Yet, you can still find rivet in the market today.

To build large iron structures and ships, hot rivets help put up things together. The rivet should be heated till it becomes red hot before placing it into the hole and join two pieces of steel or iron. To blind the rivet over the hole, one person hits the other end while the other holds it using metal tongues. The metal will join even tighter together as the rivet cools down.

The heat and hammering present in the process can be very complicated and dangerous. Much more complicated it is when getting the hot rivets. One of the best example for this is way back 1920’s when skyscrapers were built in New York. You couldn’t imagine how hard it is to to get hot rivets on a very high level.

However, things have changed today since rivets used are already cold rivets which size is relatively small than the old rivets. This is due to the fact that ships welded the steel hulls together for faster and stronger construction. The fasteners are now being used in constructing bridges.

For those doing a DIY project at home, cold rivets can be used. Visit your nearest DIY store and you will sure find a pop riveting kit. The rivet will simply tighten itself using a moderate pressure and after placing the pop rivets through the hole. Another use of the riveting gun is to crop off the rivet’s excess part.

The aircraft industry has so much respect for rivets that they are still using them until this modern days. The main use of rivets is to hold things together, and that is why they are called as fasteners.

All of these just show how rivets are able to withstand the test of time.

For different times, rivets tools have been a good choice when it comes to fixing and holding things together. This made fastening things possible even where welding is not applicable. For example, you need to join plywood and metal sheets, rivets can sure work good for this. Rivets are perfect for materials that are easy to deform. Rivets come in different sizes, so you can pick the right size according to your needs.

Rivets are known for its different level of strength which made most industries to prefer to use it for different purposes. Nowadays, there are also several rivet manufacturers that are producing quality fasteners. These fasteners are designed to be more strong, accessible and cost-effective.

Suggested Post: read review